0
1.This advanced equipment has the higher level of precessing ability and precision,mainly aimend at the precessing.the PVwire with linked photovoltaic terminals;
2.Full closed loop flexible wire feeding system,rubber belt feeding device to pretect the wire surface form damaging,increasing the wire feeding accuracy;
3.It uses network drive system to meet the industrial processing requirement of the PV wire;
4.Import servo motor drive,to ensure high precision,high efficiency and high stability;
5.Industrial computer operating system,operation easy and simple;
6.Equipment debugging is combined with manual and automatic mode,which will make debugging precess be more faster and easier;
7.Servo crimping system,crimping compression ratio is stable,to meet the requirements of cross section analysis.
| BZW-3.0+2GF | Automatic PV linked terminal crimping machine （Double ends） |
| Wire range | 4-6mm2 (Other size can be special ordered） |
| Cutting length | 80-20000mm |
| Cutting precision | ±（0.2%*L+1）mm |
| Stripping length | 0.1-15.5mm |
| Feeding speed | Max. 8.0 m/s |
| Crimping force | 30KN |
| Voltage | 220V 50/60HZ |
| Air supply | 0.5 Mpa-0.7 Mpa，8m3/h |
| Weight | About 1100KG |
| Dimension | 3500*1200*1700mm |
| Detecting ability | Wire knotting,wire lavking,terminal lacking,air pressure,bare wire and lack of terminal crimping detecting |
| Applicator range | It can be equipped with crimping force monitoring system,monitoring the pressure during the whole processing and 100% traceability |
| Function | Automatic wire cutting,wire single end striping and double end stripping/half stripping/terminal crimping(it is optional) |
