0
1.The parts of the machine are imported, which is used to tighten the nuts on the female and male connectors. it is fast in tightening speed and simple operation with stable performance, in order to save the labor cost;
2.It uses the servo motor , which the torque value can be set in fast rotation, the value of the torque force can be set on the touching screen, or the position of the connector can be adjusted to be suitable for the tightening distance of the nut;
3.It can be used to tighten the nut of the female and male connectors on the same machine, which increasing the productivity;
4.Torsion can be controlled;productivity;
5.Adopted with imported sensors. more accurate position.
| BZW-83 | PV wire connector tightening machine |
| Inspecting device | The tightening distance is controlled by the distance or the torque force |
| Capacity | 20-40pcs/min |
| Function | Tightening nuts of connector to the required position |
| Air pressure | 5-6kg(it requires the clean and dry air source) |
| Power | AC 220V/50/60HZ Single phase |
| Dimension | 500 x 400 x 280 mm |
| Weight | About 50kg |
