0
1.It is used for ribbon cable, one end interval terminal crimping , one end twisting and tinning;
2.Normally it can process 2 pcs ribbon cable at the same time, 5pcs 2pin ribbon cable or 6-8pcs electronic wires;
3.This machine could easily change the applicator and debugging; it uses servo motor to control the whole process of wire feeding, wire dividing, wire cutting and wire stripping;
4.It uses the servo motor driver to control the movement of the ribbon cable, high precise terminal crimping control;
5.Automation: wire slitting, cutting, stripping, crimping are finished at one time without any labor force, and save the production cost
6.Good stability: eccentric shaft and cam transmission structure, balance crimping force, tide crimping effect and high rate of finished products;
7.Simple operation: parameters setting by touching screen, operation is easy to learn, one worker can operate several mchines at the same time.
| BZW-2TP+Z | Automatic ribbon cable single end twisting, tinning and terminal crimping machine |
| Cutting length | 45-600mm（length can be specified） |
| A-end stripping length | 0-5mm |
| B-end stripping length | 0-10mm |
| Twisting length | 3-8mm |
| Wire type | AWG18#-30# Ribbon cable and electronic wire |
| Max. wire width | 28mm |
| Max. wire pin | 24P |
| Capacity | 10000PCS／H(12P ribbon cable) |
| Air supply | 0.4MPa-0.6MPa |
| Power | 220V 50/60Hz, 2.8KW |
| Weight | about 500KG |
| Dimension | 940 x 1100 x 1850mm |
| Function | A-end terminal interval crimping, B-end wire twisting and tinning |
