0
1. This machine is mainly suitable for new energy high-voltage lines. It can peel the outer skin, remove aluminum foil, cut the shielding net, strip the inner insulation, and turn the shielding net of the high-voltage line at one time. Each function can be used independently. Compact structure, space saving, built-in processing module, higher safety;
2. The rotary tool holder is adopted, and the machining accuracy is high;
3. The wire clamping device is driven by a motor, and the clamping force can be set;
4. Using touch screen interface, PLC control.
| Applicable wire | Coaxial cable, the expansion diameter of the shielding network is greater than 1.6mm |
| Wire diameter range | Φ6-Φ18 |
| Peeling length | 1-70mm |
| Remaining length of shielding net | ≥5mm |
| Power | 220V 50/60HZ |
| Motor | 5000W |
| Dimensions | 820*820*1350mm |
| Weight | 200Kg |
| Air source | 0.5-0.8MPa |
| Function | Peeling the outer skin, removing the aluminum foil, cutting the shielding net, stripping the inner insulation,Turn over the shielding net |
